The BR parameter, eta(BR), was found to be 0.90, indicating a first-order magnetic transition at T-N = 59.7 K. The temperature variation of the isomer shift is explained by the second-order Doppler shift delta(SOD). Using the
Debye model for the lattice vibrational spectrum for calculating delta(SOD), the characteristic Mossbauer temperature Theta(M) was found to be 400 K, which is unusually low for a ferric compound. (C) 2012 Elsevier B.V. All rights reserved.”
“In this paper, an adaptive finite element method is developed for stationary conduction convection problems. Using a mixed finite element formulation, residual type a posteriori error estimates are derived by means of the general framework of R. Verfurth. The effectiveness Navitoclax ic50 of the adaptive method is further demonstrated through two numerical examples. The first example is problem with known solution and the second example is a physical model of square cavity stationary flow. (c) 2010 Elsevier Inc. All rights reserved.”
“Novel organic-inorganic hybrid films were synthesised through the reaction of epoxidised castor oil (ECO) with gamma-glycidoxypropyltrimethoxysilane (GPTMS) and tetraethoxysilane (TEOS). The amounts of GPTMS employed were Sufficient to react with 25, 50 or 75% of the epoxy groups present in the ECO, whilst the mass proportions of ECO BTK inhibitor mouse to TEOS varied from 90:
10 to 70:30. Films were pre-cured at room temperature under an inert atmosphere, and subsequently submitted to thermal curing. Macro and microscopic properties of the films, including adhesion, hardness, swelling in toluene, microstructure (scanning electron microscopy) and thermal properties were determined as a function of the proportion of organic
to inorganic precursor. Morphologic Studies showed that the hybrid films were microscopically homogeneous when lower proportions of inorganic precursors were employed. Hardness and tensile strength increased. and swelling in toluene decreased, with the increase in the concentration of inorganic precursors. Good adhesion of the films to an aluminium Surface was observed throughout the hybrid series. (C) 2009 Elsevier B.V. All rights reserved.”
“This study investigated possible sex-related and intra-menstrual PI3K inhibitor differences in local vascular and skin temperature responses when conductive cooling was applied to the soles of the feet. Twelve females and twelve males exposed the soles of their feet to a cooling plate (which cooled from 35 to 15 A degrees C) on two occasions 12-15 days apart. For females, sessions took place during their inactive and active contraceptive pill phases. Tip of Great toe temperature and Great toe skin blood flow were recorded throughout. Females’ feet cooled to a greater extent than males’ (P = 0.001). Sensitivity of toe skin blood flow to changes in skin temperature (1 or 2 A degrees C) was not different between males and females. Dimensions of males’ feet were larger than females’ (P smaller than 0.